logo
Envoyer le message
Shenzhen Jianheng Technology Co., Ltd. 0086-137-25559416 alan@liion-batt.com
280Ah Capacity LiFePO4 Battery with 8000 Cycles and 1C Discharge for Energy Storage

280Ah Capacity LiFePO4 Battery with 8000 Cycles and 1C Discharge for Energy Storage

  • Tension nominale
    3,2 V
  • Lieu d'origine
    Guangdong, Chine
  • Nom de marque
    OID
  • Certification
    RoHS, UN38.3, MSDS, IEC62619 (available upon request)
  • Numéro de modèle
    OID71173204F280AH_4
  • Quantité de commande min
    1 pièces
  • Prix
    $0.00 (Contact for quote)
  • Détails d'emballage
    Carton individuel avec protection en mousse, 8 cellules par carton principal
  • Délai de livraison
    7 à 15 jours ouvrables après confirmation du paiement
  • Conditions de paiement
    LC, D/A, D/P, T/T, Western Union
  • Capacité d'approvisionnement
    2000 unités par semaine

280Ah Capacity LiFePO4 Battery with 8000 Cycles and 1C Discharge for Energy Storage

OID 280Ah LiFePO4 Battery – 3.2V Deep Cycle Lithium Iron Phosphate Cell

Engineered by Shenzhen Jianheng Technology Co Ltd (Jianheng), the OID71173204F280AH is a high-capacity prismatic LiFePO4 cell delivering 280Ah nominal capacity and 3.2V nominal voltage. Designed for demanding energy storage, EV, and industrial applications, it supports 1C maximum continuous charge and discharge, operates from -30°C to 60°C, and provides over 8000 cycles at 80% depth of discharge. The cell features a robust aluminum case with positive polarity, built-in safety against overcharge, over-discharge, and thermal runaway when paired with a BMS.

Key Features & Benefits
  • Ultra-long cycle life: 8000 cycles @ 196Ah (80% SOH) under 25±2°C, 0.5C/0.5P with preload.
  • High power density: 1C continuous charge/discharge (280A) at 25°C, 0.5P standard power (448W).
  • Wide temperature tolerance: Charge 0~60°C, discharge -30~60°C; low-temperature discharge down to -30°C (2.00V cut-off).
  • Excellent storage retention: ≤2% monthly self-discharge at 40% SOC, 25°C.
  • Safe & reliable: LFP chemistry, insulation resistance ≥1GΩ, withstands 1500V insulation current test.
  • Preload recommended: 500N-6000N initial preload for safety and cycle life; swelling force up to 30000N at 80% SOH.
Technical Specifications
Parameter Value
Nominal Capacity 280Ah (0.5C, 25±2°C)
Nominal Voltage 3.2V
Standard Charge/Discharge Current 0.5C (140A) / 0.5P (448W)
Max Continuous Charge/Discharge Current 1.0C (280A) at 25°C
Charge Cut-off Voltage 3.65V (absolute max)
Discharge Cut-off Voltage 2.50V (>0°C) / 2.00V (-20~0°C)
Internal Impedance (1kHz AC) ≤0.25mΩ (fresh state)
Cycle Life 8000 cycles @ 196Ah (70% SOH, 25°C, 0.5C/0.5C)
Operating Temperature (Charge) 0°C ~ 60°C
Operating Temperature (Discharge) -30°C ~ 60°C
Storage Temperature (6 months) -20°C ~ 35°C (40% SOC recommended)
Weight 5.56 ± 0.3 kg
Dimensions (T×W×H) 71.8±0.5 × 174.2±0.8 × 207.1±0.8 mm (under 300±50Kgf preload)
Insulation Resistance ≥1GΩ @ 500V
Case Material Aluminum (positive polarity), PPS plastic terminal
Applications
  • Electric vehicles (EV, HEV, commercial EVs)
  • Solar and wind energy storage systems
  • UPS and backup power
  • Industrial AGVs and robots
  • Marine and RV house banks
  • Telecom base stations
BMS & Safety Requirements

To ensure safe operation, the cell must be used with a Battery Management System (BMS) that provides: overvoltage protection (3.65V cut-off), undervoltage protection (2.50V / 2.00V), overcurrent, short circuit, overtemperature, and charge time-out (8 hours). Low-temperature charging below 10°C should avoid constant voltage mode; set cut-off ≤3.55V.

Storage & Handling

For storage exceeding 7 days, maintain SOC ≥5%. For >30 days, cycle every 3 months and store at 25-40% SOC in -20~35°C environment. Never store below 2.00V to prevent permanent damage.